|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
E-Series HMIC Double Balanced Surface Mount Mixer 700 - 1400 MHz Features * * * * * * LO Power +3 dBm to +7 dBm Up to +1 dBm RF IC Process Low Profile Surface Mount Tape and reel packaging available EMD40-900L V1 SOIC -- 8 Package Description M/A-COM's EMD40-900L is a passive double balanced mixer in a low cost, surface mount SOIC-8 package. Fabricated using a mature silicon process (HMIC), it is ideally suited for high volume cellular and wireless applications. Typical applications include frequency up/down conversion, modulation and demodulation in GSM, AMPS, DAMPS and JDC frequencies. Parts are packaged in tape & reel. Electrical Specifications: TA = 25C, Z0 = 50 1, LO = +7 dBm Parameter Frequency Conversion Loss Test Conditions -- -- Frequency 700 - 1400 700 - 800 800 - 1000 1000 - 1250 1250 - 1400 700 - 1000 1000 - 1400 700 - 1000 1000 - 1400 700 - 1000 1000 - 1400 700 - 1000 1000 - 1400 DC - 400 700 - 1000 1000 - 1400 DC - 500 Units MHz dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm Min -- -- -- -- -- 26.0 24.0 24.0 21.0 -- -- -- -- -- 9.0 10.5 -- Typ -- -- -- -- -- 34.2 30.3 28.5 26.5 1.90 2.82 1.43 3.35 1.20 13.0 15.2 -- Max -- 9.5 8.0 10.5 12.0 -- -- -- -- 2.30 5.00 2.60 4.40 1.80 -- -- 1 Isolation Isolation VSWR VSWR VSWR Input IP3 Input 1 dB Compression LO to RF LO to IF LO RF IF -- -- Ordering Information Part Number EMD40-900LTR 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Package Tape and Reel (2000 piece Reel) * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series HMIC Double Balanced Surface Mount Mixer 700 - 1400 MHz Pin Configuration Pin No. 1 2 3 4 5 6 7 8 EMD40-900L V1 Absolute Maximum Ratings 1 Function Ground Ground Ground IF LO Ground Ground RF Parameter Max RF Input Power LO Drive Power Operating Temperature Storage Temperature Absolute Maximum +17 dBm +17 dBm -40C to +85C -55C to +125C 1. Operation of this device above any one of these parameters may cause permanent damage. Schematic Spurious table (In dBc below IF, assuming down conversion) nfLO + mfRF 0 1 RF (n) 2 3 4 X 24 63 57 75 0 2 0 38 72 76 1 16 19 51 58 76 2 8 29 46 61 75 3 LO (m) RF = 970 MHz, -10dBm LO = 900 MHz, +7dBm 27 36 51 61 72 4 X 24 63 57 79 0 2 0 34 56 72 1 nfLO - mfRF 16 43 46 75 74 2 8 14 37 55 73 3 27 26 51 73 70 4 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series HMIC Double Balanced Surface Mount Mixer 700 - 1400 MHz Typical Performance Curves - Over an extended bandwidth Conversion Loss Isolation EMD40-900L V1 5.00 40.00 LO to RF 35.00 6.00 30.00 Conversion Loss (dB) 7.00 +7dBm Isolation (dB) 25.00 20.00 RF to IF 15.00 10.00 +3dBm 5.00 0.00 550 650 750 850 950 1050 1150 1250 1350 1450 550 650 750 850 950 1050 1150 1250 1350 1450 1550 1550 1250 LO to IF 8.00 9.00 +5dBm 10.00 11.00 12.00 Frequency (MHz) Frequency (MHz) VSWR IP3 & 1 dB Compression IF Frequency (MHz) 43 0 64 0 85 0 106 214 235 171 193 256 25.00 22.50 5 4.5 20.00 4 17.50 3.5 Power (dBm) Isolation (dB) RF 3 2.5 2 1.5 1 0.5 0 1000 1100 1200 1300 1400 1500 500 600 700 800 900 IF LO 15.00 IP3 12.50 10.00 7.50 5.00 2.50 0.00 1050 1150 650 750 850 950 1 dB Compression RF anf LO Frequency (MHz) Frequency (MHz) Conversion Loss measured with fixed IF frequency of 60 MHz. All Measurements made with input power of +7 dBm. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of EMD40-900L1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |